
H1: Precision Metal Stamping, Done Right
Everybody claims they do precision metal stamping. Running a part to ±0.05mm is not precision. That's regular stamping with a decent press.
Real precision metal stamping means holding tolerances in the ±0.01mm to ±0.025mm range, part after part, shift after shift, millionth piece to millionth piece. That's what we do.
H2: Our Stamping Capability
Progressive die stamping with in-die sensors
Material thickness from 0.1mm to 3.0mm
Copper alloys, brass, stainless steel, and high-strength steel
In-house die design and maintenance
CMM inspection on batch samples
IATF 16949 quality system
H2: Tooling Is Where Projects Live or Die
You can design a perfect die on a computer and it can still fail in production because the cutting clearance was off by five microns. We design our progressive dies with serviceability in mind.
The die maker can change a punch without tearing the whole tool apart. The die set is built to handle snap-through load when cutting high-strength steel.
H2: Materials Matter More Than People Think
A material temper change of 20 HV can throw bend angles off by two degrees. We write material supplier approval into every quote. Change the material, you pay for a new die. That's not us being difficult-that's protecting your project.
H2: FAQ
What tolerance can you hold in precision metal stamping?
±0.01mm to ±0.025mm on production parts, depending on material and feature geometry.
Do you design and maintain dies in-house?
Yes. Die design and maintenance are in-house, which is how we control lead time on tooling revisions.
What materials do you stamp?
Copper alloys, brass, stainless steel, and high-strength steel, from 0.1mm to 3.0mm thickness.
CTA: Send us your print and material spec. We'll tell you what works, what won't, and quote it straight.
Contact JDE Auto: www.jdecontact.com | www.jdeauto.com
